The characteristics of a water-soluble cutting oil:

Water-soluble cutting oil with excellent lubricating properties, mainly used for the processing of non-ferrous metals and steel. Environmentally friendly, non-toxic, nitrite-free, emulsion stability. It is suitable for cutting, stamping, drilling, etc. of various copper and aluminum materials. It can also be used for tapping of stainless steel, iron, carbon steel and other materials.

● Outstanding anti-oxidation effect, the aluminum parts after processing are not easy to change color.

●Excellent lubrication performance, anti-wear performance, improved processing accuracy, surface finish, effective protection of tools and extended tool life. It is an energy efficient product;

● Lubrication performance, cooling performance, anti-rust performance, cleaning performance - four can be integrated. It can effectively eliminate wear debris, iron powder, oil stains, sand particles, and other chips; heat dissipation, non-combustible, safe and reliable;

●Excellent water solubility, easy to observe the workpiece;

● It has a good fast defoaming effect and belongs to the foam suppressing type;

●Resistant to hard water and adaptable to water quality;

●The environment is clean and friendly, no waste oil is produced, no sludge pollution, the working fluid is not easy to change blue, the stability is good, it is not easy to be corrupt, and the service life is long.

Second aluminum alloy cutting fluid use method

1. Water is diluted 10-30 times. The more you add this product, the more functions. For heavy duty and extreme pressure applications, high concentration is recommended.

2. For long-term use, when the loss of cutting fluid reaches 1/2-1/3 of the total amount of cutting fluid, it is necessary to add the original liquid or the fresh working fluid of appropriate concentration in time.

3. Various automatic liquid supply methods and manual liquid supply methods such as overflow method, high pressure method and spray method can be used.

4, should use fresh water to prepare working fluid.

Three considerations

It is recommended to use high-quality drinking water to prepare the working fluid in strict proportion.

When replenishing the working fluid, it should be supplemented at a higher concentration to prevent lubrication and rust prevention performance from deteriorating.

Keep the cutting fluid clean, and do not mix metal chips, oil, wire and other debris; do not wash your hands and wash cloth with working fluid.